Valor Alpha 35x10R15 H1 – Full-Size Traction That Lasts
The Valor Alpha 35x10R15 H1 UTV tire is built for riders who want full-size trail-and-rock traction without choosing the softer, crawl-focused H2 rubber. Its American-made, 8-ply rated radial construction combines a 20mm tread with Valor's balanced H1 (65A) compound, aimed at mixed all-terrain riding and longer wear than the sticky alternative.
The Alpha's non-directional tread, square profile, and alternating shoulder lugs work together to put rubber to work across the tread face and add bite in corners. The flexible casing helps maintain contact over uneven terrain, while the multi-layer sidewall design supports traction through rocky sections. A rugged compound designed to resist cuts, tears, snags, and punctures adds durability for demanding trail use.
This is not just a tire for picking through rocks. Valor uses pitch sequencing, varying tread-block sizes to help reduce tread noise during longer hardpack runs. The H1 compound makes sense when fire roads and trail miles are part of the same ride as technical obstacles, and you value a balance of grip and tread life over the H2's softer rubber.
At 15 psi, Valor lists a measured height of 35.10 inches and width of 10.80 inches, with a tire-only weight of about 57.5 lb. This is a substantial tire, so verify wheel compatibility, clearance, and your machine's suitability for the added size and weight. The same nominal size is also available in the softer H2 compound for a more rock-focused setup.
Choose your compound: this is the H1 Standard (regular) compound 35x10R15, built for tread life on mixed terrain. Spend most of your time on rocks? The same size is also available as the Valor Alpha 35x10R15 H2 Sticky Compound.
Want a second opinion? Read UTV Off Road Mag's review of the 35x10R15 Alpha on their Polaris RZR Pro R.
Alpha 35x10R15 Key Features
-
Tallest Alpha Size: 35.1 inches of measured height for extra clearance under the diffs and skid plates.
-
H1 for Mileage: the 65A compound is the one Valor rates for 4,000+ miles, versus about 2,500 for the H2.
-
Wide Footprint: at 10.8 inches measured width, the 35 spreads load across a broad, square-shouldered contact patch.
-
Quiet for Its Size: Valor varies the tread block pitch to reduce high-speed hum on hardpack.
-
Puncture-Resistant Sidewalls: a multi-layer sidewall build guards against trail cuts and gives the shoulder lugs something solid to push against.
-
American Made: designed, built and tested by Valor in the United States.
-
NHS Rated for off-road use only.
-
Check Out the full Valor Off Road Tire and Wheel Catalog 2025
Shop Other Valor Alpha Tire Sizes
PLEASE NOTE: Tire only, wheel NOT included! Double check your tire size before ordering to ensure accuracy when ordering your new tires!
Alpha 35x10R15 Specifications
| Part Number |
VAT-351000R15H1 |
| Tire Size |
35x10R15 |
| Model |
Valor Alpha |
| Rubber Compound |
H1 Standard (regular compound, 65A) |
| Construction |
8-Ply Rated Radial |
| Tread Depth |
20mm (0.78") |
| Measured Diameter (15 psi) |
35.10" |
| Measured Width (15 psi) |
10.80" |
| Weight (tire only) |
57.5 lb |
| Wheel Diameter |
15" |
| Tread Pattern |
Non-directional all-terrain |
| Country of Manufacture |
USA |
| DOT Approved |
No (NHS, off-road use only) |
Measurements and weight are from Valor Offroad. Weights can vary by about 2% because each tire is hand built. Maximum inflation pressure is molded on the tire sidewall.
