
Featuring interlocking spokes that weave and connect, the MSA Clubber boasts a look borrowed from heavy-duty truck wheels and scaled for a side-by-side. Beyond its deeply layered face, the spokes wrap directly into the outer lip, giving the appearance of an expensive, multi-piece custom wheel while maintaining the raw strength of a single-piece, cast construction. Whether you're blasting down trails at high speeds or parked at a standstill, this wheel is sure to transform your look. While the styling turns heads, a 1,250 lb load rating means this wheel is as much business as it is beauty.Â
Color Options: Choose from four finishes change its personality. Gloss black machined turns the woven spokes into a bright web for pointed contrast that draws the eye. plain gloss black keeps it sleek, matte black with MSA's Double Dark Tint adds a smoky layer that shows in direct light, and matte bronze covers the whole wheel in a warm, low-sheen color.
All four share the same eight fitments. For trail riding, the 14x7 and 15x7 carry +10mm of offset; from 20 inches up, every size is 0mm. Every diameter is dual-drilled for 4x137 and 4x156, and owners of a Polaris Pro R or Turbo R can get 5x114.3 in the 15, 20 and 24-inch sizes.
MSA Clubber (M50) Key Features
- Woven Spoke Design: The spokes cross over each other, so the face looks three-dimensional from any angle.
- Bolt-on, Finish-Matched Caps: Each of the four finishes has its own MSA center cap that hides and seals the lug nut pockets to protect from mud and trail grit from packing into your lug wells; part numbers are listed in the notes below.
-
From 16.09 to 39.68 lbs: The 14x7 is the light trail choice, while the 24x7 carries the full look on lifted builds.
Bolt Pattern Guide
Always confirm your machine's bolt pattern before ordering.
- 4x137 / 4x156 dual-drilled (110.10mm center bore; 14x7, 15x7, 20x7, 22x7, 24x7): Dual-drilled to fit both 4x137 and 4x156 machines.
- 5x114.3 (72.56mm center bore; 15x7, 20x7, 24x7): Also listed as 5/4.5. Used on Polaris Pro R and Turbo R models.
Important Fitment & Use Notes
- Dual-Drilled Sizes: Sizes listed as 4x137/4x156 are drilled for both bolt patterns, so one wheel fits either. They use a 110.10mm center bore.
- Fitment Check: Confirm your machine's bolt pattern, and check that the offset and tire size clear your suspension, brakes, and fenders at full lock and full compression before mounting.
- Replacement Center Caps: MSA part numbers by finish: Gloss Black Machined: M50L142-H49-GBCH; Gloss Black: M50L142-H49-GBGB; Matte Black Double Dark Tint: M50L142-H49-SBGR; Matte Bronze: M50L142-H49-MBZR.